Rath is a Global Partner to the petrochemical, chemical, and energy industries providing unique engineered refractory solutions and heat containment.
Rath produces dense brick, insulating brick, special shapes, superduty fireclay brick, andalusite brick, and tabular/fused 90% to
99% creep resistant alumina brick. Our brick is used for the following applications:
- Crackers
- Reformers
- Liquid and gas feed gasification units
- Synthesis gas reactors
- Sulphur recovery units (SRU)
- Claus reactors
- Waste Incinerators
- Fired heaters, CO boilers, cyclones, hot lines, etc.
- Petroleum coke calciners
- Carbon black reactors and dryers
- Titanium dioxide pigment reactors
Primary Ammonia Reformer – Radiation Zone
Primary Ammonia Reformer Flue Gas Line
MATERIALS FOR PETROCHEMICAL, CHEMICAL, AND ENERGY INDUSTRIES
DURRATH® High-Temperature Corundum Bricks
DURRATH® HD 45 provides high chemical resistance, high
mechanical wear resistance, and very low open porosity (6%) with high thermal resistance
DURRATH® HD 45 is available in standard brick sizes
(straights, arches, and wedges), as well as custom plates
and shapes.
KORRATH® High-Temperature Corundum Bricks
KORRATH® grades are corundum, tabular alumina,
mullite, and zirconia-based with high-density, high-purity,
low porosity, and good-to-excellent thermal shock
resistance.
KORRATH® is available in standard brick sizes (straights,
arches, and wedges), as well as custom plates and shapes.
SILRATH Andalusite High-Alumina Bricks
SILRATH andalusite base bricks are dense,
high-alumina
bricks with very low flux levels and relatively low porosity. SILRATH bricks are characterized by excellent high-temperature load resistance and outstanding thermal shock resistance. This exceptional resistance to thermal shock allows these bricks to withstand repeated cycles of up to 120 times from a hot furnace to a cold bath.
PORRATH® High-Temperature Insulating Firebrick
PORRATH® high-temperature insulating firebricks are available in ASTM Group 26 through 34 classifications and are manufactured with the highest quality raw materials and high-firing temperatures.
PORRATH® IFB feature low thermal conductivity, excellent thermal shock resistance, high-purity, low-iron oxide content,
and mechanical properties. PORRATH® IFB exhibit excellent resistance to corrosive and/or reducing atmospheres.
PORRATH® is available in standard brick sizes (straights, arches, and wedges), as well as custom shapes.
Carbon Black Reactor
Ethylene Furnace Bridge Walls
